Does anyone have the details of installing the RR deploy-able side steps i have purchased a set of second user one's and have all the bits, ecu, wiring harness and steps, but have no idea where the harness/ ecu is supposed to be fitted, any help would be appreciated.

You need to print this off:

http://topix.landrover.jlrext.com/topix/co...tabs=false Discovery 4 HSE
1998 110 TUM HS FFR Hard Top XD WOLF
1982 Series 3 Hard Top

*Gone:L462 D5 HSE LUX, L663 Defender 110 HSE, Discovery 3 HSE, 2014MY Range Rover Sport 5.0 Supercharged AB Dynamic; L405 Exec Vogue SE 4.4, 5.0 Supercharged Autobiography, Defender TDCi XS CSW, Defender TD5 HT, Vogue SE TDV8, Vogue TD6, RRSport SC 4.2V8, Classic 3.9 Vogue Auto, Land Rover Series 3 SWB

and maybe this one too:

http://topix.landrover.jlrext.com/topix/co...tabs=false Discovery 4 HSE
1998 110 TUM HS FFR Hard Top XD WOLF
1982 Series 3 Hard Top

*Gone:L462 D5 HSE LUX, L663 Defender 110 HSE, Discovery 3 HSE, 2014MY Range Rover Sport 5.0 Supercharged AB Dynamic; L405 Exec Vogue SE 4.4, 5.0 Supercharged Autobiography, Defender TDCi XS CSW, Defender TD5 HT, Vogue SE TDV8, Vogue TD6, RRSport SC 4.2V8, Classic 3.9 Vogue Auto, Land Rover Series 3 SWB

The only side steps I can see on the TOPIx are the fixed one's and not the deploy-able one's do i have to log into the other area than the owners one to get access to the fitting instructions for the deploy-able side stept?

deffo there under access

http://topix.landrover.jlrext.com/topix/co...tabs=false

do'h just seen it's already linked above