Looking for a rear load liner so the dog hairs are easier to get out
What should i be looking to pay and would like it to be a high side plastic type about 6 inch or there abouts.
Location Tyne and Wear

I have one available near leads if your looking for a rigid load liner  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

How much I could possibly get my mate to collect it

Princely sum of £45 as it's not perfect and has the odd crack but for your use should do pretty good  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

Will give it a miss mate for that i just missed a few on ebay that were mint but thanks for the offer i am in no rush

No worries

Here is the only semi decent one available that has worse cracking than my available one
http://www.ebay.co.uk/itm/Genuine-landrove...3f2963db84

And the only recent one i've seen in the last few weeks was in west sussex but collection only again and went for £60 They seem to be getting rarer and more abused as well as i do buy and sell a few of them when i can be bothered but most that i've been offered in the last 4 months are worthy of the bin without spending a lot of time fixing many large cracks A lot of them seem to suffer from people not storing them well in garages and so on which is never good for them long term. FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.