Regardless the material used my original post was ment to be what fellow members thought about a lager offset of the wheelmounting...
It seems that most of the FFRR members are only interested in the stainless steel nuts because they noticed some rust on the OEM nuts..........
Is this what keeps you going? A rusty nut?
Anyway, for those who cares about this item, have a look at following pictures.

Very nice sir

Very nice indeed

Sorry to digress your topic, a wider track will surely help with cornering and wider wheels.

My firm interest in them is the cr4ck design where LR use a soft metal with a slightly harder shiney pieace of tinfoil over the top which then leads to fun when the become unstuck and start to warp which happens after a few tyre changes, and worse when an airgun is used  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

You have loverly nuts sir  2008 MY Supercharged
Rimini Red / Jet
four zone climate
remote park heater
and no ugly kid windows.
magnus satis quod turpis satis