Hi Dan

Please could you let me know the prices for (1) bike carrier part VTG500020 and (2) the removable swan neck VUB000730 (does this also include the box etc which fits into the cubby hole in the boot?

Many thanks

Hi

yes includes stowage
VUB000730 £415+VAT
VTG500020 £285+VAT

do you already have the tow armature in place? what year is your FF You can paypal direct using - www.paypal.me/duckworthparts
Please supply your full name address when sending a paypal payment.
https://www.facebook.com/duckworthparts
www.duckworthparts.co.uk
My Direct Line: 01673 849873
Email: robin.hall@duckworth.co.uk
Supplier of Genuine Land Rover & Jaguar Parts For All Models

Dan.

Yes, I have the armature. Model is a 62 plate Westminster.

Payment just made to your PayPal account.

Many thanks.

 You can paypal direct using - www.paypal.me/duckworthparts
Please supply your full name address when sending a paypal payment.
https://www.facebook.com/duckworthparts
www.duckworthparts.co.uk
My Direct Line: 01673 849873
Email: robin.hall@duckworth.co.uk
Supplier of Genuine Land Rover & Jaguar Parts For All Models

Is the armature available on its own Dan?

yes certainly is cost £312inc vat You can paypal direct using - www.paypal.me/duckworthparts
Please supply your full name address when sending a paypal payment.
https://www.facebook.com/duckworthparts
www.duckworthparts.co.uk
My Direct Line: 01673 849873
Email: robin.hall@duckworth.co.uk
Supplier of Genuine Land Rover & Jaguar Parts For All Models

Sorry - bit confused here - the Westfailia part number is A50-X D164,4 Si50

ts the bit that goes into the square hole and the swan neck fits into it. I have the armature and I have the swan neck - I am missing this carrier type thing.

I'm guessing its not available separatly as I havent seen any on ebay.

so you don't require the tow armature.

is it the biker carrier itself you need? You can paypal direct using - www.paypal.me/duckworthparts
Please supply your full name address when sending a paypal payment.
https://www.facebook.com/duckworthparts
www.duckworthparts.co.uk
My Direct Line: 01673 849873
Email: robin.hall@duckworth.co.uk
Supplier of Genuine Land Rover & Jaguar Parts For All Models

Sounds like he has the armature - and has the removeable neck - but is missing the detachable mount that bolts into the armature.

if its the highlighted bit below then unfortunately not available seperate

if you just require the swan neck holder, ie the part that goes into the square hole, then try some of the range rover breakers, on ebay, and ask them, as these are more common than the swan neck itself, they get left in the garage, and eventually on ebay, the holder only requires a pin pulled out, and gentle presuasion to slide out.
i have a 'spare' bike carrier that can slide into the 2 inch hole itself, no towbar/housing needed. if anyone is interested, though it will need extending with some arc welding, and the supllied box section to extend it. i would weld it myself, but people might think its not factory, and not trust it. its as new! i made a similar one from a similar rack, but mine holds 4 bikes!
it was on ebay,
http://www.ebay.co.uk/itm/261243784939?ssP...243wt_1170

it holds 2 bikes, but is so strong it will easily hold more. especially the weight of bikes today.