Ok gents and the occasional lady(don't mean you mick/John!!!)

I'm going to be getting this jack in the next week or two
http://bit.ly/ODUmv6

And I want a snug fit so I'm going to a metal fabricator I've heard good things about to see what he can knock up to fit snugly into the FFRR slot and also keep the bottle jack in place.

I have a hemi spherical bearing with slots idea in my head to cope with the angle change and to keep te bottle perfectly planted and balanced.

I'm hoping for a price of no more than £15-25 each maybe less depending on design and it may likely only suit the above jack but it is possible it could do others.

Who's interested please  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

something like this?

http://www.disco3.co.uk/forum/topic83315.html ... - .- -.




Y. O. L. O.
.

Very similar stan(thats what gave me the idea!) but the mounting point for the FF is more like a block and doesn't allow any articulation which is thus built into the jack making the jack weaker and non OEM jacks twist then.

Trying to fix 2 problems at once. Yes you can get trolley jacks but they are much heavier and bulkier and still the car will twist on the jack instead of the jack twisting so not ideal IMO but i have dont it myself with some wood.

I'll get one mocked up out of wood soon and then ask the fabricator what he thinks and what can be done.

Im hoping to be cheaper than the D3 price though by a decent margin! FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.