Just a quick thread to say if any of you are looking at buying number plates in the near future i recommend : www.demonplates.com

Ordered my plates Monday, arrived Tuesday !

The "plate builder" is simple to use and allows plates to your specification even when you want "show plates" you space letters as you wish.

They do the Range Rover rear big plate which not all sites do.

My personal plate looks spot on now!  TDV8 HST Sport **Current**

4.4 V8 Autobiography and 22" wheels **Gone**

if you dont want show plates and just normal spacing, do you need to provide the certificate to show you can have the plates made up? Discovery 4 HSE
1998 110 TUM HS FFR Hard Top XD WOLF
1982 Series 3 Hard Top

*Gone:L462 D5 HSE LUX, L663 Defender 110 HSE, Discovery 3 HSE, 2014MY Range Rover Sport 5.0 Supercharged AB Dynamic; L405 Exec Vogue SE 4.4, 5.0 Supercharged Autobiography, Defender TDCi XS CSW, Defender TD5 HT, Vogue SE TDV8, Vogue TD6, RRSport SC 4.2V8, Classic 3.9 Vogue Auto, Land Rover Series 3 SWB

http://www.fullfatrr.com/forum/topic800.html

Show plates don't belong on FFRR's - just not right! 2010 MY Vogue SE TDV8 3.6 Stornoway Grey- fully loaded

Ive not got show plates, Just meant they do them.

Ive got my plate legally spaced and the plate is legal.

No V5 needed either to order them so its miles less hassle. TDV8 HST Sport **Current**

4.4 V8 Autobiography and 22" wheels **Gone**

Thanks to Macdaddy I now have my new plates from these folks too. Great service and a nice 'vehicle specific' rear plate was easy to order.

Martin - I would have gone with your guys but the FFRR offering wasn't there. I couldn't find a way to order the larger rear plate whereas the ones who we can't mention made it very easy.  The older I get, the more I realise that people confuse wrinkles for wisdom

The FFRR doesn't take a shaped plate unlike the RRS, so craigsplates' 21x6 inch plate should be the right one for the back of the FFRR.

Happy to corrected if someone wants to get their tape measure out

Martin wrote:

Happy to corrected if someone wants to get their tape measure out

You're probably right Martin, but that would have required some effort to go and measure the car for a plate without knowing it was the right one for the car. The 'other' site had a drop-down box for car-specific plates and you just click the box for a FFRR. Lazy, I know........  The older I get, the more I realise that people confuse wrinkles for wisdom

Must admit i wouldnt have been bothered to go measure the plates.

The drop down box with RR was much easier lol TDV8 HST Sport **Current**

4.4 V8 Autobiography and 22" wheels **Gone**