where can I get a replacement transmission cooler from at a fair price ? or can they be flushed \?

If it's not leaking they can be cleaned

Might be better to change it pal, we have to change them when we fit recon gearboxes...So they obviously block up...



Craig

It is not worth reusing them after a rebuild - especially the TD6 (GM) trans cooler as the transmission usually lets go with a huge shower of internal shards. The particulates left in the cooler are so fine you can not flush them out completely. Risking a GBP2000 rebuild over an additional GBP300... Most manufacturers recommend similar: Porsche recommends the same thing for the engine oil cooler when a motor has popped.

If it is the ZF (V cooler that has stopped up it's a different story. If the cooler can be cleared with a flush - I'd do it. 
RRC 2Dr, RRC 4Dr,
P38, and 2 L322s
(wife thinks I'm nuts - prob right, too)

so where can i get one at a fair price ??

Unfortunately I believe it's only available as an OEM part.
LR calls for both lines and cooler to be replaced.

Give Dan a shout (Duckworths - site sponsor). 
RRC 2Dr, RRC 4Dr,
P38, and 2 L322s
(wife thinks I'm nuts - prob right, too)