I’m trying to find the Fan mounting bracket torque settings for my 4.4 TDV8 I’ve spent ages going through the manual but I can’t find any reference to the torque settings for this part can anyone help
It’s item no 4 on the picture below

Click image to enlarge

When I did mine I think I used the torque setting of an equivalent sized bolt used elsewhere if that makes sense.

I looked up torque settings for m8 bolts got 48nm this bracket is under a lot of stress and forces due to it housing the fan 2012 Range Rover Westminster 4.4 TDV8
2006 Discovery 3 HSE 260k miles and still going strong with a new owner

It's still an M8 fixing though, any more and you risk stretching the bolt or tearing threads out of the tapped hole.

That’s what I’ve set them at, stupid thing is I spent a hour going through the WM and although it’s mentioned I can’t see any reference to the torque 2012 Range Rover Westminster 4.4 TDV8
2006 Discovery 3 HSE 260k miles and still going strong with a new owner

I think that's what I set mine to and it hasn't fell off yet.