Do all 2012 L322s have rear tow hooks fitted as standard?

Mind does not have one.

Thanks 2012 4.4 TDV8 Westminster - Baltic Blue, Jet interior
1997 P38 2.5 DSE auto & 1998 P38 2.5 DT Manual
1988 Vogue 3.5 EFI - Manual, gone.
2004 Volvo C70 2.0T convertible, had since new.
2007 Mazda MX-5 2.0 Sport Roadster/Coupé, had since new.
2024 Mini Cooper S cabrio, JCW kit, 2.0, DCT auto

I think you answered your own question!

The answer is no.  Bish.

2005 110 TD5 CSW
2011 TDV8 Vogue SE (gone)

^1

but you may well have tow preparation fitted. Mine had no bar but was fitted with a connector in the spare wheel well, rear bulkhehad, left hand side, looking from the rear of the car. It's a grey rectangular socket.

You may be able to get a build sheet form Topix or you may be able to search with your VIN number on vindecoderz.com. It can sometimes work, or not, keep trying.

Then it's a case of the towbar choice. Cheers
Richard

(there are no such things as an ordinary FullFat, an ordinary cat or too many tools)
2011 TDV8 Vogue Santorini Black
Gap IIDBT

As above, a 2012 should have the towing loom and box in the boot ready to plug a towing electrics kit into.
Grey box on rear edge of wheel well
 Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

Thanks, guys.

The car did previously have a tow bar, but removed before I took ownership. This explains it. 2012 4.4 TDV8 Westminster - Baltic Blue, Jet interior
1997 P38 2.5 DSE auto & 1998 P38 2.5 DT Manual
1988 Vogue 3.5 EFI - Manual, gone.
2004 Volvo C70 2.0T convertible, had since new.
2007 Mazda MX-5 2.0 Sport Roadster/Coupé, had since new.
2024 Mini Cooper S cabrio, JCW kit, 2.0, DCT auto

If needed I have the "side tow bar parts" available for a 2010/2012 model.




Just installed a new removable tow bar (a non Land Rover), that came as a complete set.



Also found a 13 pin cable with the correct connector to make use of the available connector in the boot.
Worked straight away!

 RR Vogue, 4.4 TDV8, 10/2010, Santorini Black
(EGR out, 380HP, 800Nm)

I’d be interested in the 13 pin connector with loom if no-one else has first soviet on it. 2010 MY Vogue SE TDV8 3.6 Stornoway Grey- fully loaded

Hi Andy,

I only have the side brackets available.
Purchased a new tow bar and cable for own use.
Found in in The Netherlands at (sorry for the Dutch language website):
http://ecs-trekhaakbekabeling.nl/landrover...over.-13p/

This is a 13pin cable with the correct connector. Installing was just 30min work!
The manual is on this pages, so take a look and you know
The part number is LR-017-DH (or LR017DH), so maybe you can look if you can find it in the UK too.

Success. RR Vogue, 4.4 TDV8, 10/2010, Santorini Black
(EGR out, 380HP, 800Nm)