Home > Wheels & Tyres > Taking front wheels off |
|
|
pld118 Member Since: 25 Mar 2013 Location: Bairns Posts: 4218 |
When removing wheels on ours, I put it in off road height setting and leave the drivers door open (remember to switch off interior ceiling light) before then chalking wheels on a level, solid surface, cracking the wheel nuts, jacking the car using handbook advised jacking points and positioning axle stands as per guidance before taking the wheel off.
|
||
17th Oct 2016 4:23pm |
|
Strider Member Since: 08 Jun 2015 Location: Hertfordshire Posts: 500 |
Thanks
|
||
17th Oct 2016 6:50pm |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8192 |
Flashers does absolutely nothing... Any door open (not the boot) prevents the suspension from levelling..
|
||
17th Oct 2016 7:21pm |
|
Landphil Member Since: 03 Oct 2016 Location: U.K. Posts: 119 |
The hazard flashers has become folklaw in some parts of the Land Rover world. It originates from advice given in the handbook about changing a wheel at the roadside following a puncture. The instructions are quite noddy and take you through everything you need to do and include "switch on hazard flashers."
|
||
17th Oct 2016 7:41pm |
|
Joe90 Member Since: 29 Apr 2010 Location: Hampshire Posts: 6408 |
Other than unlocking the car (to stop the alarm going off when jacking), and on occasion putting into off road height for better access, don't do any other FFRR specific stuff, never had a problem. .
|
||
17th Oct 2016 8:17pm |
|
Strider Member Since: 08 Jun 2015 Location: Hertfordshire Posts: 500 |
Thanks everyone,
|
||
17th Oct 2016 9:38pm |
|
miggit Member Since: 12 Jul 2014 Location: Milton Keynes Posts: 3657 |
It never ceases to amaze me just how far the stupid HSE guide lines have reached.... I remember having a massive argument with a security guard over not putting my hazard lights on the drive around a field, because I had a 4.5 foot light bar going on the roof and strobe packs in the grill and rear bumper Apparently that wasn't good enough, works for the Highways Agency and the Police Muppet
|
||
19th Oct 2016 5:47pm |
|
p38arover Member Since: 16 Dec 2015 Location: Western Sydney Posts: 1526 |
Miggit, wHen I read your HSE comment above, I wondered why not the Vogue models.
|
||
19th Oct 2016 7:59pm |
|
miggit Member Since: 12 Jul 2014 Location: Milton Keynes Posts: 3657 |
HSE.... Health and Safety Executive...... A government organisation dedicated to finding the most illogical and dangerous way of doing a job, and then legislate the most expensive and resource hungry solution possible....
|
||
19th Oct 2016 10:47pm |
|
p38arover Member Since: 16 Dec 2015 Location: Western Sydney Posts: 1526 |
I've oft commented to my wife about the differences in UK home renovation programmes vs the Australian ones.
|
||
20th Oct 2016 1:08am |
|
miggit Member Since: 12 Jul 2014 Location: Milton Keynes Posts: 3657 |
It would appear that we have seen the rest of the worlds safety regulations and then decided to better them... I've a pal who used to clear the tree growth from the power lines, he tells many a story outlining the ridiculous health and safety regulations over here.......
|
||
20th Oct 2016 8:38am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis