Home > Wheels & Tyres > What wheels are these ? |
|
|
JOKER Member Since: 11 Sep 2008 Location: Sconnie Botland Posts: 15876 |
Thought they were the 20" alloys that came with the Evoques ... |
||
11th Feb 2016 7:40pm |
|
Rrtdv8 Member Since: 09 Feb 2016 Location: Sussex Posts: 9 |
They can't be evoque wheels if they fit on a full fat |
||
11th Feb 2016 7:41pm |
|
Rrtdv8 Member Since: 09 Feb 2016 Location: Sussex Posts: 9 |
I'm going to look at these wheels tomorrow
|
||||
11th Feb 2016 7:47pm |
|
northernmonkeyjones Member Since: 24 Mar 2012 Location: derby Posts: 8508 |
certainly were never a factory fitment from LR on the L322. they are as Mick said style 504 Evoque wheels, or copies there of, don't think the originals have Range Rover stamped on them.
|
||
11th Feb 2016 9:13pm |
|
rangie47 Member Since: 26 Feb 2015 Location: Malvern Posts: 296 |
the l494 has wheels that are slightly similar ,and in 20 inch
|
||
11th Feb 2016 9:29pm |
|
miggit Member Since: 12 Jul 2014 Location: Milton Keynes Posts: 3657 |
I would be very careful cos ewok wheels are nowhere near the load capacity of the L322 or L405, so you could be looking at a potential failure, and invalidated insurance to boot... Yesterday I couldn't spell Engineer... Today I are one!
|
||
12th Feb 2016 12:02am |
|
miggit Member Since: 12 Jul 2014 Location: Milton Keynes Posts: 3657 |
Having seen your other post I've just had a nose on the bay of fleas and they are Evoque 20” Style 6 Alloys, the Evoque uses a tapered (cone shaped) wheel nut, All the ffrr's and L405 use a flat washered wheel nut so they are totally different, and I'm not sure that the thread is the same, so on top of the extra ton they will have to carry, you will also need new wheel nuts that are tapered M14 x 1.5, if that is not the size that the Evoque uses Yesterday I couldn't spell Engineer... Today I are one!
|
||
12th Feb 2016 12:13am |
|
Cam-Tech-Craig Member Since: 03 Aug 2011 Location: Gloucestershire Posts: 16284 |
Evoques are 5x108 PCD and FF’s are 5x120 so there is no chance the OP could accidentally fit a set of Evoque wheels to a FF anyhow Miggit |
||
12th Feb 2016 12:21am |
|
miggit Member Since: 12 Jul 2014 Location: Milton Keynes Posts: 3657 |
So what's going on up top? Yesterday I couldn't spell Engineer... Today I are one!
|
||
12th Feb 2016 12:39am |
|
JOKER Member Since: 11 Sep 2008 Location: Sconnie Botland Posts: 15876 |
Top picture is from a dealers website that is selling this FF |
||
12th Feb 2016 1:03am |
|
Cam-Tech-Craig Member Since: 03 Aug 2011 Location: Gloucestershire Posts: 16284 |
Copies/fakes etc etc... |
||
12th Feb 2016 6:49pm |
|
miggit Member Since: 12 Jul 2014 Location: Milton Keynes Posts: 3657 |
A Fake Range Rover, is nothing sacred, although I must say that they have done a very good job..... I can't spot the difference Yesterday I couldn't spell Engineer... Today I are one!
|
||
13th Feb 2016 11:50am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis