 | Home > My Range Rover > Carbon |
 
|
|
|
| spanner Member Since: 05 Jun 2011 Location: uk Posts: 134  |
purchased knobs from land rover and changed them |
||
13th Jan 2013 8:54pm |
|
| Jr-auto-electrics Member Since: 15 Jan 2012 Location: West Midlands Posts: 189  
|
You wouldn't have the part numbers would you.
|
||
|
13th Jan 2013 9:24pm |
|
| JohnnyDangerous Member Since: 16 Dec 2012 Location: East Sussex Posts: 833
|
If you have the part numbers Ill get a set as well, they look well smart. One day your life will flash before your eyes......................................make sure yours is worth watching!
|
||
|
13th Jan 2013 9:49pm |
|
| Cam-Tech-Craig Member Since: 03 Aug 2011 Location: Gloucestershire Posts: 16286 
|
Did mine a while ago too |
||||
|
13th Jan 2013 10:56pm |
|
| daveo Member Since: 21 Oct 2009 Location: london Posts: 2307 
|
dont think you can buy them direct from the dealers tried when i first see them on a S/C, ended up getting the complete unit, so what did you mob,the knob or the switch.. V8 facelift Range Rover Autobiography 22" wheels.
|
||
|
14th Jan 2013 12:43am |
|
| spanner Member Since: 05 Jun 2011 Location: uk Posts: 134 |
You have to turn the exsisting knob down to accomodate the new knob is quite easy then clip the new one on the cigar lighter is a switch for my surround cameras I have 4 |
||
|
14th Jan 2013 7:44am |
|
| daveo Member Since: 21 Oct 2009 Location: london Posts: 2307
|
how much did you take of, small amount and do it with switch in situ or a large amount and had to remove switch panel..i take it we are talking a dremel. V8 facelift Range Rover Autobiography 22" wheels.
|
||
|
14th Jan 2013 7:56am |
|
| spanner Member Since: 05 Jun 2011 Location: uk Posts: 134 |
Yes take them out I used a lathe |
||
|
14th Jan 2013 8:01am |
|
| Gazellio @ Prestige Cars Member Since: 22 Jan 2010 Location: Chilterns, UK Posts: 11309 
|
So they cannot be purchased separately? |
||
|
14th Jan 2013 8:07am |
|
| Gazellio @ Prestige Cars Member Since: 22 Jan 2010 Location: Chilterns, UK Posts: 11309
|
Nice job can we see pictures of the exterior? |
||
|
14th Jan 2013 8:10am |
|
| spanner Member Since: 05 Jun 2011 Location: uk Posts: 134 |
will do when weather is better |
||
|
14th Jan 2013 7:08pm |
|
| daveo Member Since: 21 Oct 2009 Location: london Posts: 2307
|
so when you turned it down you loose the 2 lugs that stick out...how did you mount it in the lathe V8 facelift Range Rover Autobiography 22" wheels.
|
||
|
14th Jan 2013 7:31pm |
|
| spanner Member Since: 05 Jun 2011 Location: uk Posts: 134 |
Hi Daveo yes just cut the lugs off then mount in lathe using the stubby shaft then turn down to 24mm |
||
|
15th Jan 2013 7:06am |
|
| johnboyairey Member Since: 11 Jan 2013 Location: surrey Posts: 2032 
|
hi, that looks fantastic, what is a typical price to do these parts, ie all the parts in these pictures, if i removed mine and 'sent then in' please. |
||||||||||||
|
11th Mar 2013 12:17pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
